FAQ

We rivet a unique stamped number plate to all Rupprigger series outriggers. The plate is located about 18” up from the bottom of the outrigger, on the main base tube. It is important to have this number available when calling to order replacement parts like cables, spreaders or replacement tube sections. Older “hard to read” plates are easier to read when wet.

Note: Rupp Top Gun outriggers do NOT have serial number tags. 

All Rupp hydraulic power units have a serial number tag on the electrial enclosure of the power unit assembly. Please have this number handy when calling to order parts or request service for your hydraulic outriggers.

See below Chart.

See below Chart.

We ship internationally almost every day of the week. Small outriggers such as our Top Gun series can ship either UPS or Priority Mail, we typically work directly with the customer to select the most economical shipping method. Large outriggers ship in 10-15 foot boxes and must ship via truck (LTL) shipments. We work with a number of carriers and shop to find the most economical shipping method. Large outrigger box shown below being prepared for transit.

See our maintenance guidelines in the Support section of our website.

• High-Quality, American-Made Products:

  • Design and manufacture in the United States, ensuring top-notch quality.
  • We build everything in Stuart, FL.

• Exceptional Customer Support:

  • 100% product guarantee backed by the best warranty in the industry.
  • Outstanding technical support and customer service available.

• Extensive Dealer Network:

  • Locate a dealer near you through our website's "Dealer Locator" link, or find what you need in our factor store.
  • Purchase online from our factory-direct web store.

• Efficient Replacement Parts Service:

  • Same-day shipping of replacement parts upon request.
  • Unique identification system simplifies ordering; just provide your outrigger's "set number."

• Direct Access to Knowledgeable Staff:

  • Easily accessible employees, including product makers and management, reachable via phone at (772) 286-5300.

• Versatile Product Range:

  • Perfect fit for boats of all sizes, from 18' tenders to 100+' custom sportfishing vessels.

• Preferred Supplier to Leading Boat Builders:

  • Trusted by top boat builders worldwide, including Viking, Rybovich, Merritt, and many more.
  • Rupp products chosen for their superior value and quality.

Our PowerRigger series require either 24v DC or 110v AC, depending on the package you purchase. We offer a 12v DC system for smaller boats and smaller outrigger applications.  Call or email Rupp for more specific information on any of our hydraulic outrigger packages.

Yes! See our support section for the most commonly referenced diagrams; others can be emailed to you by requesting them via phone or email. Contact service@ruppmarine.com with the serial number riveted to the base of your outrigger, see question#1 above for location.

Our experience is that the re-anodizing process is cost prohibitive. Additionally, even if the outriggers can be fully disassembled they are often hard to get back together once they are reanodized due to the tolerance changes associated with re-anodizing.

Outrigger tuning involves removing the spreader-style outriggers from the boat and spinning them to ensure they're straight and the cables are properly adjusted, akin to tuning bike spokes. This process is essential for optimal function and to minimize damage from excessive movement. It's also an opportunity to replace worn cables and missing bushings. Watch a video tutorial here.

We recommend performing this task at least once a year, though frequency may vary depending on usage. Our dealers specializing in outrigger installation can assist you with this. Feel free to contact Rupp for a list of authorized dealers.

This is ultimately for you to negotiate with the installer and will depend on factors such as boat location, make, model and type of outrigger system. A rule of thumb is around $1500-$1800 for large outriggers and $900-$1,000 for Top Gun products depending on how much labor is involved, outrigger ready boats can be considerably less. Hydraulic outrigger installations are typically only quoted after looking at the boat. For a list of approved installers please contact Rupp Marine at (772)286-5300.

We supply detailed installation instructions with each shipment and they are avaialbe in the support section of our website. Our large outriggers require some expertise and basic tools; most prefer to have it done professionally.

Rupp Top Gun (T-top mounted) products can be easily installed, especially if the boat comes pre-rigged with a mounting plate, install instructions are available for download online.

No, Rupp Marine is the product manufacturer. We have a list of installation partners and dealers in your area who can install our product for you. We have traveling dealers who will pick up the product from our factory deliver, and install it for you. Email service@ruppmarine.com for an up-to-date listing.

Rupp Top Gun poles are designed to FIT INTO a 1.5” ID tube. Rupp poles can be sleeved to fit virtually any outrigger base currently available on the market. Advise our customer service department when placing your order, or select your base type from the drop down menu when ordering online.

Yes! All of our outrigger systems are built-to-order, so making slight modifications to fit a unique application can almost always be accommodated.

Yes. You can purchase products from our entire catalog directly from the factory by calling 772-286-5300 or 866-477-2678. A partial catalog of parts are available for purchase online through our website. Large “spreader style” outriggers are only available for purchase by contacting Rupp directly.

The main differences are the outside tube diameters, overall length and number of spreaders available. See our Rupprigger section of the website for more detailed information.

We recommend telescoping poles for individuals who:
a) Frequently trailer their boat.
b) Utilize rack storage.
c) Frequently remove outriggers for any reason.
d) Frequently utilize their vessels for uses other than fishing.
e) Frequently run at high speeds over long distances

Otherwise, our fixed (non telescopoing) poles will work just fine.

We have outriggers that will fit any size boat. Contact Rupp customer service via phone or email and we will be happy to guide you to the correct product for your vessel.  Contact page here.

We have an extensive database from over 40 years of fitting our products to various vessels. We make our determination based on several factors.
a) Make, model and size of vessel.
b) Fishing location.
c) Your specific fishing style.
We recommend you reference our product selector page and call Rupp to discuss what product best suits you and your boat.

Please don't shoot the messenger.  Manufacturers, producers and importers of sport fishing products such as rod holders, outriggers, downriggers and various other related products are responsible for collecting and paying Federal Excise Tax (FET) upon the sale of such goods. The U.S. Fish and Wildlife Services administers the wildlife and sport fish restoration programs and distributes funds to State fish and wildlife resource agencies. To find out if you qualify for an export exemption visit the irs.gov website or call (772) 286-5300 to discuss with Rupp Marine customer service.

There are many brands of “ceramic nano coatings” currently on the market, most of these coatings have similar chemistry. The variation comes in how the surface is prepared and how the product is applied. Properly applied ceramic coating can improve the life of the anodizing by forming a ceramic barrier on top of the factory anodizing. However, if the coating is not applied correctly it can damage cables, leave streaks and flake off. Should you decide to protect your outriggers with a ceramic coating we recommend that you choose a reputable company that is familiar with how to coat outriggers. Contact Rupp for list of experienced companies.

We can provide you with a quote for a custom color in our carbon fiber series. Standard colors are black or white, but we can provide these system in any Awlgrip color avaialble.  Contact Rupp customer service for more information.